The 9 Best Goals, Nets & Field Equipment

Take your game to new heights with the PRIMED® Flat Cones 4-Pack. Set up these highly visible orange cones for your soccer dribbling drills, end zone pylons, foul lines or anything in between. The 2” height and 7.5” diameter allows the cones to be seen without interfering with play. Constructed from durable, flexible material, the PRIMED® Flat Cones 4-Pack is the perfect accessory for your next game or practice.

• 4-pack of flat practice cones
• 2” height x 7.5” diameter
• Durable, flexible material
• High visibility orange

Take your game to the next level by training with the Primed® 4-Pack Collapsible Training Cones. Built to improve speed and agility during your workouts, use these cones to weave in and out or mark your playing surface. The collapsible design always returns to shape after being folded or crushed, dramatically reducing the risk of injury to ensure hours of exciting action. Train to be the best with the Primed® training cones.

• 9’’ height
• Collapsible design helps reduce the risk of injury
• Returns to shape after collapsing
• High-visibility orange color
• Primed

Keep your soccer goal in the perfect position with the Kwik Goal® Saddle Anchor Bag. Fill the Saddle Anchor Bag with up to 40 lbs of sand (not included) to keep your goal in place throughout the game. The bag straddles the bottom bar of the goal to provide the perfect counter-balance. The Saddle Anchor Bag features a stainless steel clasp and “D” ring for easy attachment to your goal.

• Goal anchor bag holds up to 40 lbs of sand (not included)
• Stainless steel clasp and “D” ring for easy attachment to goal
• Straddles bottom bar of goal for simple, secure fit
• Features plastic center strip, reinforced stitching and zipper for maximum support
• Works on all surfaces
• Model: 10B1605

Revamp your field hockey equipment this season with the Kwik Goal® Official Field Hockey Goal Replacement Net. Compatible with the Kwik Goal® Official Field Hockey Goal and Practice Field Hockey Goal, the replacement net is constructed with durable High Tenacity Polypropylene (HTPP). The 2.mm twisted rope has a 1.5” mesh size and weighs 5 pounds.

• Replacement net for the Kwik Goal® Official Field Hockey Goal and Kwik Goal® Practice Field Hockey Goal
• Dimensions: 7’ (H) x 12’ (W) x 3’ (D)
• 2.5 mm twisted rope with 1.5” mesh size
• Material: High Tenacity Polypropylene (HTPP)
• Weight: 5 lbs.
• Model: 3F501

Here are the instructions for the two f5o. One official field hockey goal the tools needed to complete the two f5o. One are box wrenches in 7/16 9/16 5/8. And 3/4 inch a ratchet with a socket in 7/16 9/16 5/8. And three-quarter inch. And the utility knife to begin unpack. All of the parts and check for any damage. That may have occurred during shipping if damage has occurred be sure to notify the trucking company immediately before beginning the assembly please verify. You have received all the boxes needed remove. All the cardboard and packaging immediately. Or damp packaging that may damage the contents. All hardware and ground anchors are in. More boxes shipped with the goals contents of the box PT 30 include four anchor plates to saddle anchor bags for ground sleeves net clips with a hex driver to channel spacers to hardware packs four anchor pegs. One net layout the rest of the parts. These components of the 2f 501 will be the left. And right arm assemblies the crossbar. And the backboard quickl recommends laying out. All of the hardware on the card board prior to assembly lay out the rail in. One arm assembly insert a channel spacer into the channel on the rail. And start the sleeve of the arm assembly into the rail Y up. All of the holes connect the rail using a 3/8 inch by. And a quarter-inch hex bolt a 3/8 inch lock washer. And a 3/8 inch flat washer press the joints together firmly before tightening the bolts do not over tighten over tightening will cause damage repeat.

This process for the other side attach the eye bolt to the backdrops using a quarter inch by two inches. Ibolt quarter-inch flat washer. And a quarter-inch lock nut. You can use the secure net clip driver to hold the eye bolt. While installing the lock not repeat. This process for the other side standing assembly upright carefully lifting from the crossbar of the goal carefully place the backboard against the assembly. And attach using a 3/8 inch by two. And a half inch hex bolt. And a 3/8 inch flat washer followed by a 3/8 inch flat washer. And a 3/8 inch lock nut be sure to attach the top. And bottom of backboard using this process repeat. These steps for the other side carefully lay the assembly down on the front post of the goal for net attachment to attach the net untangle. And lay out flat once the net is laid out untie the backdrop rope.

And remove it from the net attach backdrop rope is shown you’ll need to tie the rope. And do a secure knot on the first Idol then run the other end of the Rope through the other eyeball walk three-quarters of the way down from the eyeball towards the other backdrop. And tie a secure loop at. This point thread the excess rope through the loop. And pull taut tie the remaining rope pull the net over the goal backdrops in the frame be sure. That the top corner tags are in the top corners of the goal attach the secure net clips using the net clip driver as shown place the base of the secure net clip into the channel. And turn 90 degrees to lock into place repeat. This process on the cross bar posts. And bases the 2f 501 offers three different options of anchoring to use the anger pegs. You must first attach the anchor plates the anchor plates are attached to the base of the goal using a 7/16 by three.

And a half inch carriage bolt 7/16 flat washer 7/16 lock washer a 7/16 hex nut repeat. This process for the other side. Once the plates are attached pounding the ground anchor pegs using a mini sledge counterbalance weight may be used as a temporary anchoring system to ensure counterbalance weight remains on the base of your goal. You must attach the counterbalance weight as shown to anchor your goal permanently please refer to your instruction manual.

The Kwik Goal® Wheel Option adds convenience to your Kwik Goal® Official Field Hockey Goal or Kwik Goal® Indoor field Hockey Goal. The wheel option set includes two Reliance Turf Pro “No Flat” Tires that install on your goal and feature rotating wheel brackets that allow the equipment to lift off the ground and be easily transferred to a new location.

• Set of 2 Reliance Turf Pro “No flat” Tires
• Fits the Kwik Goal® Official Field Hockey Goal and the Kwik Goal® Indoor Field Hockey Goal
• Wheel brackets rotate permitting the field hockey goal to be lifted off the ground and easily moved around any facility
• One set needed per goal
• Manufacturer’s Lifetime Guarantee
• Model: 10B404

Renovate your field hockey equipment this season with the Kwik Goal® 2 m x 3 m Indoor Field Hockey Goal Replacement Net. The black replacement goal net is 2.mm twisted polyethylene rope with a 1.5” mesh size, and is compatible with the Kwik Goal® Indoor Field Hockey Goal.

• Replacement net for the Kwik Goal® Indoor Field Hockey Goal
• Dimensions: 2m (H) x 3m (W) / 6’7” (H) x 9’10” (W) x 4’ (D)
• 2.5 mm twisted rope with 1.5” mesh size
• Material: Polyethylene
• Weight: 4 lbs.
• Model: 3F601

Dazzle your competition next time you step on the field thanks to the Jugs® 110 Volt Field Hockey Machine. This easy-to-use delivery machine is great for improving your goalkeeping skills or working on your receiving. Lightweight and low to the ground, you are always prepared to practice. The Jugs® 110 Volt Field Hockey Machine is ready with simple AC power or a 1,000 watt generator.

• Great for goalkeeping and receiving
• Easy-to-use features
• Low-to-the-ground base
• Lightweight for practicality
• Powered by AC power or 1,000 watt generator

Refurbish your field hockey goal with an official sized net from Champion®. The Champion® Field Hockey Net is composed of durable, 2.5 mm braided 1.5” square polyethylene netting and is the official net size (12’ x 7’ x 4’). Includes two replacement nets.

• Official size field hockey net
• 2.5 mm braided 1.5″ square polyethylene netting
• Dimensions: 7’ x 12’ x 4’
• Includes 2 nets
• Model: HN20
• Champion

Ensure your equipment is ready for the season’s start with the Alumagoal® Premier Field Hockey Nets. The Premier Field Hockey Nets are constructed with weather-treated nylon knotless netting and meet official field hockey specifications. The set includes one pair of field hockey goal nets.

• Set of two replacement field hockey nets
• Weather-treated knotless nylon netting
• Meets official field hockey specifications
• Dimensions: 7’ (H) x 12’ (W) x 4’ (D)
• Does not include goals
• Model: SN383ELM

Every item is guaranteed by the manufacturer to be free of defects in workmanship or materials for one year from the original date of delivery when installed and maintained properly. The manufacturer agrees to repair or replace without charge, at their choice, any product judged defective for either of these reasons and to return the item (or its replacement) freight prepaid. Products that do not have a special guarantee carry up to a one-year guarantee which is honored only when the product is inspected and found to have experienced normal use.205 Please contact the manufacturer for additional information.